Inozetek is the film people ask for by name when they want a wrap that looks painted. It's also the film that separates shops that wrap from shops that wrap well, because it goes on dry and shows every shortcut. Here's what makes it different and what to expect.
Here's what you'll find below:
- The short answer
- Why SuperGloss looks like paint
- The lines we install
- How it goes on differently
- Is it right for your car?
The short answer
Inozetek SuperGloss has a thicker, smoother face than most wrap films, so it reads as paint instead of vinyl, even up close. It installs dry with a repositionable adhesive, comes off cleanly, and is rated for up to 6 years on vertical panels. It costs more than standard cast film and takes a more careful install.
If you want people to ask "is that paint?", SuperGloss is the film that gets the question.
Why SuperGloss looks like paint
- A thicker face film, about 3.7 to 4.1 mil against 2 mil for most cast wraps. The extra thickness gives a deeper, smoother shine with fewer of the fine ripples you can see on a thinner film.
- Real depth of color. Solid colors look like a fresh respray rather than a colored sheet, especially on big flat panels like hoods and doors.
- Low-tack adhesive. We can lift and reposition the film during install, so panels line up without stretch marks, and it removes cleanly later with the adhesive on the film.
- Rated for up to 6 years on vertical panels in Inozetek's own testing.
The Inozetek lines we install
- SuperGloss: deep solid colors, from Black Out and Nardo Grey to Blood Red and Citrus Yellow.
- SuperGloss Metallic: fine metallic flake in the same paint-like gloss, like Atomic Blue and Midnight Purple.
Browse every color in the wrap color browser, then stop by to see real swatches. Inozetek colors look different on a whole car than on a screen.
How Inozetek goes on differently
Most wrap films are installed wet or with a slip solution. Inozetek is dry-apply: the film goes straight onto a spotless panel with no slip, so prep has to be perfect and every pass of the squeegee counts. It's also installed one direction across the whole vehicle to keep the color even from panel to panel, since metallic and gloss films can read a shade different if one panel is laid the other way.
That's why a SuperGloss wrap costs more in labor than the same color in a standard cast film, and why an inexperienced install shows up as lines, trapped dust and mismatched panels. It's the kind of work we do every day.
Is Inozetek right for your car?
- Yes, if you want a color change that looks painted, you garage or cover the car, and you'll keep it washed by hand.
- Consider standard cast film if you want a satin, matte, color-shift or textured finish, or you want the lowest cost per year on a daily driver that lives outside.
- Either way, a ceramic coating made for vinyl in the first week keeps the gloss deep and the washing easy.
Read how a wrap should be cared for in our wrap guide.
Inozetek FAQ
Is Inozetek better than 3M or Avery?
For a gloss color that looks like paint, yes: the thicker face film gives a deeper, smoother finish. 3M, Avery Dennison, KPMF and ORAFOL offer more finishes (satin, matte, color shift, textures) and cost less. We install all five and pick the film for the look you want.
How long does an Inozetek wrap last?
Inozetek rates SuperGloss for up to 6 years on vertical panels. Real life depends on sun and care: a garaged, hand-washed car gets the most out of it.
Does Inozetek damage paint?
No. The low-tack adhesive is designed to come off cleanly with the film, and the wrap protects the factory paint underneath while it's on.
Why does an Inozetek wrap cost more?
The film costs more per roll, and the dry, one-direction install takes more time and skill than a wet install of standard cast film.
Can I get Inozetek in satin or matte?
We install the SuperGloss and SuperGloss Metallic lines. For satin and matte looks we use satin and matte cast films from Avery Dennison, 3M, KPMF and ORAFOL.